Blog

Fix black screen with blinking cursor in Windows 10 with some basic troubleshooting · Remove all your external devices · Restart Windows Explorer. Need to fix Windows 10 black screen with cursor after login? Read this article, you will learn 11 solutions. Don’t forget to backup files. Hi, I have been trying to login to my computer for two days but every time I enter my password a black screen with only a cursor appears.❿
 
 

Windows 10 black screen with cursor after login – Microsoft Community. Windows 10 home black screen with cursor after login free

Follow the onscreen instructions to start the restore process. After System Restore, proceed and update all device drivers on your system, before updating Windows Another method that usually can fix many problems in Windows 10, is to repair Windows with an in-place upgrade. For that task follow the detailed instructions at this article: How to repair Windows 10 with an in-place upgrade.

Many times, it is better and less time consuming to backup your files and to RESET your PC or to perform a clean Windows 10 installation , than to try to resolve problems in Windows That’s it! Which method worked for you? Let me know if this guide has helped you by leaving your comment about your experience. Please like and share this guide to help others. We’re looking for part-time or full-time technical writers to join our team! It’s about a remote position that qualified tech writers from anywhere in the world can apply.

Click here for more details. How to , Tutotial , Windows , Windows 10 , Windows Abdallah Ahmed July 26, am. Komolafe Tobi June 21, pm. This is not at all helpful, my screen is not displaying anything but the cursor on a black screen, I cannot see anything when I use any of the task manager solutions listed above.

The screen is unresponsive to any keyboard input. I have the same issue. Up down arrow couple times, enter 3. Atanu das April 4, am. Thank U very much from the core of my heart solution 3 worked like a charm for me I had tried a lot of tricks before but this was my solution….

Albert February 6, am. But if the spinning dots stays on the screen without any changes for a long time, it could be a compatibility problem with some hardwares connected to this computer. You can try to disconnect all the peripherals including additional monitors, additional external adapters, fancy headphoes, etc. Just start with the basic vanilla configuration and restart the device to see if that’s going to bring any difference.

Tips: If you find some important files are missing after succesfully fixing the black screen issue of your Windows PC, Recoverit data recovery can also help you get lost data back in 3 simple steps as shown in the video tutorial below:. There you go! I’m sure that after going through this extensive guide, you would be able to fix the Windows 10 black screen after the login problem. I have listed various software-related and hardware-related issues that you can follow to resolve the black screen after the login issue.

Though, if you have lost your data during the process, then you can simply use a data recovery software like Wondershare Recoverit. Used by experts, Recoverit can help you get back all kinds of lost and deleted content from computer stuck on black screen by creating a bootable USB drive. Download it now to rescue your data! Here are 7 different solutions for you to resolve the Windows black screen after login issue. Download Win Download Mac.

David Darlington. Roll back the Display Adapter Driver 4. Uninstall your Display Adapter Driver 5. Uncheck Turn on fast startup recommended option and click Save changes button. Incompatible drivers can also cause this black screen error, to fix it, you need to uninstall installed graphic drivers in safe mode. To do so, use the following steps. In the Device Manager window, expand Displayed Adapters.

Then, right-click the installed display adapter and choose Uninstall device. Here you will see the Uninstall Device window, be sure the option Delete driver software for this device is checked and click Uninstall again. Once the device restarts, your computer will try to reinstall the graphics driver automatically to solve this error.

If this problem still exists, you can try to roll back the graphic drivers by the following steps. Go to the Device Manager and expand Displayed Adapters. In the Properties window, click the Driver tab.

Then, Scroll down to the Roll Back Driver and select it. In the Driver Package rollback window, select any reason and click Yes. It’s saide to be a working solution. System file error is also a cause for the black screen with blinking cursor error. The steps are below. Type cmd in the search box, select it and run as administrator. If it does not fix the problem, type DISM. Type recovery in the search box and select it.

Step 5. Confirm the restore point and click Finish to restore computer to an earlier date. If you are not able to access the safe mode, you can go to the Windows recovery environment and try to troubleshoot your computer with given recovery tools, such as, Startup Repair, System Restore, System Image Recovery, Command Prompt, Reset this PC.

Reset this pc can be the last resort if you cannot fix the black screen error. Is there some physical damage of your Windows 10 computer? These hardware issues could also be the reason of “my Windows 10 computer turns on but the screen is black”. If none of these methods so far working, you can try with the absolute minimum configuration – disconnect all peripherals. Peripherals connected to the device may also cause black screen or black screen with spinning dots of Windows computer.

Normally, spinning dots on screen during startup means that the computer is installing a update, and you just need to wait for a while.

But if the spinning dots stays on the screen without any changes for a long time, it could be a compatibility problem with some hardwares connected to this computer. You can try to disconnect all the peripherals including additional monitors, additional external adapters, fancy headphoes, etc. Just start with the basic vanilla configuration and restart the device to see if that’s going to bring any difference. Tips: If you find some important files are missing after succesfully fixing the black screen issue of your Windows PC, Recoverit data recovery can also help you get lost data back in 3 simple steps as shown in the video tutorial below:.

There you go! I’m sure that after going through this extensive guide, you would be able to fix the Windows 10 black screen after the login problem. I have listed various software-related and hardware-related issues that you can follow to resolve the black screen after the login issue. Though, if you have lost your data during the process, then you can simply use a data recovery software like Wondershare Recoverit.

Used by experts, Recoverit can help you get back all kinds of lost and deleted content from computer stuck on black screen by creating a bootable USB drive. Download it now to rescue your data! Here I’ll take file backup as an example to show you the entire process, you could follow the steps below. As you cannot access your computer, you need to create bootable USB on another working computer and boot from it. Connect the bootable USB, change boot priority of it and boot from it.

Click Add File or Add Folder and select files you want to backup. If you want to backup files with a certain file extension , you can click the funnel shape at the right side of the selected folder and set the specific file extention.

Note this feature is available on the professional version, you can upgrade to it if needed. Click the folder shapped button to select the backup destination. If it’s an external hard drive, you need to connect it to the computer having problem. One single backup will only backup data at that point, which will not include the changes made later. Thus, if necessary, it is suggested to create a schedule backup so as to continously protect data. To make it, click Schedule and select any of backup settings you like.

Then, click OK to save the chanages. Access the Windows recovery environment. Here you will asked to reset this pc while keep files or remove everything, select Keep my files. In the Ready to reset this PC window, It will tell you that the apps or settings does not come along with this PC will be removed.

Confirm it and click Reset to start the process. Wait until the installation process completes, set your preference settings and install apps or settings you will need. The Windows black screen with cursor after login error is just one of problem during the use of computer, you can try to search for solutions when it occurs and fix it. But there is a possibility that you cannot fix it, the only chance is to reset your PC from scratch.

Thus, it’s suggested to backup important files, system or disk with a free backup software before something bad happens. To keep track of all the changes, you need to create a continuous backup by backing up them regularly, such as, daily, weekly, monthly.

User case: Windows black screen with cursor after login.

❿

I am getting black screen with cursor after login. – Windows 10 home black screen with cursor after login free

Incompatible drivers can also cause this black screen error, to fix it, you need to uninstall installed graphic drivers in safe mode. To do so, use the following steps. In the Device Manager window, expand Displayed Adapters. Then, right-click the installed display adapter and choose Uninstall device. Here you will see the Uninstall Device window, be sure the option Delete driver software for this device is checked and click Uninstall again.

Once the device restarts, your computer will try to reinstall the graphics driver automatically to solve this error. If this problem still exists, you can try to roll back the graphic drivers by the following steps.

Go to the Device Manager and expand Displayed Adapters. In the Properties window, click the Driver tab. Then, Scroll down to the Roll Back Driver and select it. In the Driver Package rollback window, select any reason and click Yes. It’s saide to be a working solution. System file error is also a cause for the black screen with blinking cursor error. The steps are below. Type cmd in the search box, select it and run as administrator. If it does not fix the problem, type DISM.

Type recovery in the search box and select it. Step 5. Confirm the restore point and click Finish to restore computer to an earlier date. If you are not able to access the safe mode, you can go to the Windows recovery environment and try to troubleshoot your computer with given recovery tools, such as, Startup Repair, System Restore, System Image Recovery, Command Prompt, Reset this PC.

Reset this pc can be the last resort if you cannot fix the black screen error. It allows you to reset this pc and keep files in Windows 10 , but apps and settings will be removed thoroughly.

Having said that, some users still say they lose their important files during the process. Thus, please take it seriously before use. It’s a wise choice to backup important files or system. You can download it to explore it yourself.

Here I’ll take file backup as an example to show you the entire process, you could follow the steps below. As you cannot access your computer, you need to create bootable USB on another working computer and boot from it. Connect the bootable USB, change boot priority of it and boot from it. Click Add File or Add Folder and select files you want to backup. If you want to backup files with a certain file extension , you can click the funnel shape at the right side of the selected folder and set the specific file extention.

Note this feature is available on the professional version, you can upgrade to it if needed. Click the folder shapped button to select the backup destination. If it’s an external hard drive, you need to connect it to the computer having problem. One single backup will only backup data at that point, which will not include the changes made later. Thus, if necessary, it is suggested to create a schedule backup so as to continously protect data.

To make it, click Schedule and select any of backup settings you like. To run DISM, you should type the following commands one by one. Step 1: Enter the WinRE.

Step 2: Choose Keep my files and continue with the resetting process. You can get some feasible methods to get rid of it. Click to tweet. What should you do after fixing the annoying issue? Here is a piece of professional backup software — MiniTool ShadowMaker for you to do that.

It enables you to back up files and keep them safe from an unbootable computer. Besides backing up files or folders, it can also back up disks, partitions, and even the operating system. Now, download MiniTool ShadowMaker Trial from the following button or choose to purchase an advanced edition. Free Download. MiniTool ShadowMaker chooses the operating system as the backup source by default.

There is no need for you to choose again. Then wait for the process to be finished. After it is finished, you have successfully backed up the system. MiniTool ShadowMaker is a user-friendly program that can help back up the operating system with a few steps. In addition, if you have any problem with MiniTool ShadowMaker, you can feel free to contact us via the email [email protected]. Download Shadowmaker. Read More. Tip: If you choose to remove everything, you had better back up your important files in advance, read this post – How to Back up Data without Booting Windows?

Easy Ways Are Here! Tip: You had better choose an external hard drive as the destination since you can also access it even if the computer is crashed. Depending on your keyboard and mouse model, the Windows keys you should press are different.

Hardware failure is likely to cause your laptop screen flickering. The loose or damaged screen cable, the inverter, and backlight can also cause this issue. How do you fix a black screen on a laptop? Try to Fix Black Screen Issue can help you do that. Open Control Panel. Then, select System and Security and Power options in order. In the Power Options window, select the Choose what the power button do option. Uncheck Turn on fast startup recommended option and click Save changes button.

Incompatible drivers can also cause this black screen error, to fix it, you need to uninstall installed graphic drivers in safe mode. To do so, use the following steps.

In the Device Manager window, expand Displayed Adapters. Then, right-click the installed display adapter and choose Uninstall device.

Here you will see the Uninstall Device window, be sure the option Delete driver software for this device is checked and click Uninstall again. Once the device restarts, your computer will try to reinstall the graphics driver automatically to solve this error. If this problem still exists, you can try to roll back the graphic drivers by the following steps.

Go to the Device Manager and expand Displayed Adapters. In the Properties window, click the Driver tab. Then, Scroll down to the Roll Back Driver and select it. In the Driver Package rollback window, select any reason and click Yes. It’s saide to be a working solution.

System file error is also a cause for the black screen with blinking cursor error. The steps are below. Type cmd in the search box, select it and run as administrator. If it does not fix the problem, type DISM. Type recovery in the search box and select it. Step 5. Confirm the restore point and click Finish to restore computer to an earlier date. If you are not able to access the safe mode, you can go to the Windows recovery environment and try to troubleshoot your computer with given recovery tools, such as, Startup Repair, System Restore, System Image Recovery, Command Prompt, Reset this PC.

Reset this pc can be the last resort if you cannot fix the black screen error. It allows you to reset this pc and keep files in Windows 10 , but apps and settings will be removed thoroughly. Having said that, some users still say they lose their important files during the process.

Thus, please take it seriously before use. It’s a wise choice to backup important files or system. You can download it to explore yourself. Here I’ll take file backup as an example to show you the entire process, you could follow the steps below.

As you cannot access your computer, you need to create bootable USB on another working computer and boot from it. Connect the bootable USB, change boot priority of it and boot from it. Click Add File or Add Folder and select files you want to backup. If you want to backup files with a certain file extension , you can click the funnel shape at the right side of the selected folder and set the specific file extention.

Note this feature is available on the professional version, you can upgrade to it if needed. Click the folder shapped button to select the backup destination.

❿
 
 

❿